Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Plastic breather valve spacers .135"Use with plastic breather valves only. Large hole. Note: Steel breathers require steel breather valve spacers. Plastic breathers require plastic spacers. Do not intermix steel and plastic parts. Note: The OEM plastic breather is low cost but an inferior; poor quality product that will cause damage to crankcases in the breather bore since it is prone to distorting. The sooner this stock type breather is removed; the better. We highly recommended to

2 x 12 pin to original harness - Maximum ambient temperature: 80 degree Celsius - Input voltage range: 7 - 18 Volt

This fork cartridge kit is compatible with OEM components to maintain the original look

Used to install inner and outer 5th gear bearings to factory depth

Upgrade replacement for 16834-99A (studs) and 16478-85A and 16480-92A head bolts

closes the holes on the rear fender and allows installation of a HeinzBikes license plate holder

a strong synthetic leather-look material which has superior strength

Note that these lighted vent inserts replace the stock non-illuminated vent inserts

Tip size: TX30

live in the style of the culture of the first half of the 20th century and want to wear just like these crazy goodfellas and gals want to vary and wear "different" clothing

emblem or other accessory to your backpack or tactical vest

customizeable turn signal flash

This tool will not damage bearing or main drive gear during installation

Exchange/Return Notes