Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Series Parallel pre-populated DIY PCBSeries Parallel switcher for two effects Series Parallel is an active summing amp circuit which can help the builder put two circuits in one enclosure and switch them between series and parallel operation. The PCB is fully populated with resistors, IC's, and most capacitors. Just add two 100 uF filter caps, a protection diode (1n5818, 1n4001, etc), and a 3pdt solder pin type footswitch or toggle switch. Note, input and output jacks should be wired

This pedal — called BJR — is a highly refined version of the original Brutalist Jr

After over 10 years of development

825” thickness at the 1st fret

Heavy Metal pedal designed by Nick Williams

95” at the 12th fret)

wired as indicated on the back of the board

the GCI Crimson Cock is the perfect way to optimize how your amp responds to your guitar

22 medium jumbo frets

1 Tone (Flat Top Metal Knurled Knobs)

Gain converted to a dual pot to control two gain stages simultaneously resulting in a much wider range of useable gain settings

5” Scale

75” Scale