Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

CADTrac 1500After numerous requests CADplans has developed CADTrac, the articulated, 4 wheel drive, multipurpose tractor you can build using a welder, bandsaw, drill press, torch, common hand tools and commonly available parts. The all hydraulic drive of CADTrac eliminates the belts, chains, transmissions, gears and sprockets associated with other machines of this type. CADTrac is intended for use by the homeowner, farmer, landscaper, plumber or electrician.

CADLoader RT can be configured to give power down so the weight of CADLoader RT can be placed on the bucket

Now you can have a toothed bucket and a plain edge bucket for only a few hundred dollars rather than the high cost of ready made buckets

Weight (approx

Install a filtered breather in the unused port of the cylinder to keep dirt out during gravity down operation

a 12-volt hydraulic power pack can be used to actuate the cylinder(s)

Wheel drive - Separate hydraulic motors

CADplans makes no warranty stated or implied and the builder must assume all liability for safe construction

Three point hitch CADDiggers

lower the Grapple 3PT to the ground

Hydraulic Pressure 2

CADTrac typically costs 1/4 or less of a comparably sized tractor

The plans are for a 60" bucket